Category: Knitting

The Closest Thing I Know To Being Pregnant • The Cobbler Cowl Pattern Release

I feel like I’ve been pregnant these past few months. I was creating something special. There were days when I felt stressed and frustrated. Sometimes, I felt worried. But other days, a strange bout of confidence and euphoria would take over! These last few days felt like the final hours in the hospital bed. I wanted to scream and pull my hair out. I wanted those who were supporting me to be close, and yet I could feel myself squeezing their hands. Today, my baby is welcomed into the world. Today is The Cobbler Cowl pattern release day. Congratulations, it’s a…cowl?

wintersweatherknits_thecobblercowl_2

I began this concept back in January, out of the fed up-ness of trying to make things for other people. I wanted to make something for myself. Strangely enough, not a lot of planning went into the original version. I just started knitting. I liked it, and other people liked it too. While I do alright with likes on Instagram, I started noticing more people leaving comments. Strangers in public who normally minded their own business began asking questions. It felt like a winner, thus it was destined to be shared.

So, I drafted up the pattern. I edited, and I revised. I scrapped entire documents to start over multiple times. My yarn friend Kate was supportive enough to not only test knit the pattern in its early stages of being constructed (mostly through math and visualization), but chose a wonderful colour combination of her yarn and allowed me to use it as the sample for the official pattern. It has certainly been a dream to be collaborating on a project like this, as if releasing my own pattern wasn’t thrilling enough.

I managed to recruit a few more test knitters to test the math on the other sizes. Lucky me somehow drew the interest of another fairly popular yarn dyer. She was a fantastic tester. She chose amazing hand dyed yarns and posted well-crafted photos with captions and comments that generously promoted me. I later found out she won’t even get to wear the cowl because it’s not cold enough where she lives! Seems like she’s using it as a display piece to showcase her yarn however, which again works out in my favour.

Alas, I present to you, The Cobbler Cowl. Now available in the shop and on Ravelry at a discounted rate for the first week only! Furthermore, the first 25 buyers will receive a 20% off coupon code for Fidley Dyeworks yarn!

Get the pattern on Ravelry, or in the WWK Shop.

And, don’t forget your yarn!

Make sure to Instagram your projects with #wintersweatherknits and tag me @wintersweatherknits so I can see them!

 

“That’s the beauty of it. You’ve got the rest of your life to knit them all.” • Pay It Forward Shawl

The days are getting longer, and I’m beginning to wake up to sunshine. Looking out the window, you could assume Spring is here. Only the keen observer would notice that the trees are bare, and the dew on the grass was frost just a few hours earlier. What exactly does one do in this rather confusing situation? Well, you make a Spring-inspired shawl, of course!

A little while ago, I got my hands on a skein of merino sock yarn with this lovely pink and green speckle, and a skein of tonal army green to match. Looking at them in my stash gave me butterflies (and not just because of the Spring colours)! I browsed so many amazing patterns, but struggled to commit to just one. I sought reassurance from Kate and received an unexpectedly wise response: “That’s the beauty of it. You’ve got the rest of your life to knit them all.”

Alas, I settled on Pay It Forward, designed by one of my favourite local designers, Wolf and Faun Knits. While I had originally planned to knit a shawl with open lace and floral designs, this was the pattern I could imagine knit up with my yarn. The majority of the shawl is a simple garter stitch, with the occasional row of eyelets. The uniqueness comes from the asymmetrical drape and the picot edging.

Of course, I gave the shawl my own WWK twist. I used needles 2 sizes up from the recommended size in order to achieve more drape. Also, I wanted to maximize the use of my yarn, so about halfway through I went rogue on the pattern and made up some extra rows of striping. I believe my final product is a fair bit larger than the pattern intended. It turned out beautifully though, and I still get butterflies when I look at it. More so, it’s lovely to support local in the both yarn and pattern departments.

I’m going to be rocking this shawl everywhere while the weather is in this perfect Winter-Spring transition state!

((On a frustrated and grumpy sidenote, I’m so upset that the quality of the pictures I have been uploading for the blog is so terrible! They look beautiful when I export them, but the minute they get uploaded they turn blurry and gray. I have been trying so hard to figure out why and modify appropriately, but nothing is working so far. So, sorry. Even Instagram is maintaining the quality of my photos better, so most likely I’ll be uploading more photos there and reducing the number of photos included in the blogs. If anyone has suggestions, please share.))

The Taylor Mittens

Happy (BC) Family Day to my maker family! Hope you’re all enjoying yourselves whether you have the day off or not. Today’s post is dedicated to someone from another one of my families, namely, my work family. She has been so supportive of my craft, and her reactions to my projects remind me to value my work. Part of what makes my hobby so special is getting to keep my friends warm, so this project was incredibly pleasing. Hopefully I will get more opportunities to be part of collaborations like this one. For now I’ve just got these Taylor Mittens, named after Taylor, for Taylor.

wintersweatherknits_taylormittens_5

It all started one evening, while program planning for work. Taylor mentioned how cold her hands were. I offered her my Tree Mittens and they warmed her up almost immediately! By the end of the night she wanted a pair of her own. Since starting work with her, I’ve come to value her as a colleague and friend. Thus, making these for her also brought me a ton of warmth!

I’ve discovered a love of taking custom orders right down to the specific fibre type and colour. I let her describe exactly what she wanted her mittens to look like, and had the yarn dyed up by Kate at Fidley Dyeworks. Originally, I didn’t want to take custom orders because I wanted to create what I wanted. On the other hand, the collaboration and exchange of ideas is incredibly motivating. Even though there’s a chance I won’t be fully in support of someone else’s idea, it’s super cool to see what other people come up with. I have yet to come across a customer whose ideas I didn’t love!

The yarn was magical, as always. Knit up in a basic stockinette stitch, the speckles blend to give an almost watercolour-like effect. And every so often there was a little blue or orange speckle, which was a happy byproduct of the dye powder. Although Taylor had asked for a plain design (I guess she’s not into trees…), I decided to add a special cuff, to make them a true WWK design. It is double layered for warmth, and makes the yarn look extra snowy.

wintersweatherknits_taylormittens_2

And of course, she also asked for the finger holes. Apparently I’m not the only one that likes the convenience of not having to rip off my mittens to use my phone!

I’m unofficially calling these The Taylor Mittens. Have a look at the new “Custom Orders” section of the shop for details, and order something of your own!

Let’s Talk

Let’s talk honestly for a moment. (I know I missed Let’s Talk Day, but it’s always a good time to be open).

Since this year began, I haven’t felt quite right. I felt a lot of pressure trying to create unique items to have ready for the shop. It was like a race against Winter, which seemed to be passing by so quickly. I came up with idea upon idea that excited me initially, then seemed to lose its charm.

Last week, I finally decided that I had to stop thinking like a business woman and get back to who I am, a maker. This was never supposed to be a job. It’s a creative outlet for me, and a channel through which to fundraise for my community.

wintersweatherknits_lykkeneedles

I treated myself to a new set of Lykke Interchangeable Needles, and pulled a couple of baby alpaca skeins from my stash, ready to make something just for me. Immediately, I felt something switch in my brain that reignited a spark in me. The ideas kept flowing, and I felt myself envisioning designs that all serendipitously came together (like, seriously…do the multiples and stitch counts for different patterns ever all just match?!). Even though I had to frog numerous rows, numerous times, I didn’t feel discouraged at all. I powered through, and somehow ended up with something incredible!

All this to say I’m returning to designing knitting patterns, and I am anticipating releasing a pattern for this lovely textured cowl, fondly known as The Cobbler Cowl, in the near future! I also plan to make some slight modifications to turn it into a hat, and eventually, a cardigan. Currently looking for people willing to test the cowl pattern, if anyone is interested!

wintersweatherknits_thecobblercowl_bear
I always share my creations with my mom (@onebearceramics), hoping for approval, but expecting a shrug or an eyebrow raise. She’s a pretty tough critic. This time however, I saw the same light behind my eyes flicker in hers. She ooh-ed and ahh-ed, and asked for a sweater version of my design.

I think I’m going to stick to designing for awhile, as I have ideas swimming around in my head, and I can feel a strong passion for this aspect of knitting. I’m also open to custom orders via DM, because I find these more fun to do. As always, send me a message with whatever’s on your mind! And stay tuned for a new WWK pattern!

A Weasley Sweater for DUUUKE

This is my buddy, Duke. Duke is a fox terrier with a goofy smile, skinny legs and a pointy bum! Duke loves cuddles and any kind of attention he can get. And although Duke came from Alberta where the snow piles high and the temperature drops low, Duke lives in the temperate weather of Vancouver, and he gets cold!

Back when I first started knitting, I made myself a Weasley sweater which turned out so well everyone else wanted one too. 3 sweaters later, we decided that our family dog Pepper should have one. I made my first dog sweater in the same style, and this became our family go-to for Christmas and family photos.

Years later, Pepper is no longer with us, but I now make friends with all the furbabies I encounter. I am grateful for all the people who are kind enough to share their furry friends with me. I received special commission to make a sweater for Duke, and I was happy to oblige!

When you don’t have a dog to model, but you do have a ceramic polar bear…

The quality of my work has much improved since my early knitting days. Better materials, better workmanship, better outcome. I got to work with hand-dyed merino wool (courtesy of Duke’s momma aka Fidley Dyeworks), and tried my hand at fairisle knitting. I even have fancy fabric tags with my logo on it now!

Duke is a lovely customer. He absolutely returns all the love and looks super handsome and cozy. He’s probably the fanciest doggo in the park.

 

Bonus: found this cute little video of Pepper wanting all the attention. This is what knitting with a dog was like <3

Pender Cardigan (#wip pt. 3/3)

Glad to be getting back into weekly blogs. In the time I’ve been away, I’ve completed quite the number of projects, which you would have seen if you’re following me on instagram. If not, no worries! I will be rolling out new posts for old projects over the weeks to come!

First up is the final post of my Pender Cardigan wip…It’s complete!! I had originally intended to have another check-in post before the final product, but I got swept up with the website move and completed the cardigan without stopping to take photos.

I did take the time to note down my thoughts as I worked through it though, so here they are. To see the final product, skip to the bottom of the page.

***

As I get closer to the end of a large project, I start to get nervous as to whether or not it will turn out like I imagined, particularly with knits that need to be blocked. It’s the point where I’ve already committed so much to it, that any changes that need to be made may involve significant backtracking.

After attaching the sleeves to the body as instructed in the pattern, I found it difficult to work with the rest of the garment because it became quite bulky. I have suspicions my sleeves ended up too long for my body, so I removed them and started putting together the collar first. I also ran into some issues with picking up stitches on the collar, so I went ahead and modified to achieve what I wanted (yet again, I have failed to complete a pattern the way it was instructed…oops). After trying it on at this point, I’ve fallen in love with it all over again! The stitch definition is looking so good and it is holding its shape incredibly well.

Here’s how it looked without the sleeves and hem. It looked so amazing I was almost tempted to leave it as a vest instead!

I went on to add the bottom hem, which I also shortened both length and widthwise to give a shorter and tighter look. Halfway through the hemline, I tried it on and got chills!

Full disclosure, I actually finished all the components within 3 weeks of starting, but left it sitting for another month because of my pure hatred of seaming. I found myself more enticed by other knitting projects that I never sat down to tidy up. Blocking was a whole other ordeal. I finally committed to finishing when my custom made ceramic buttons were finished. They really tied the piece together (literally.) so it was a perfect finish.

***

Alas, all the coziness in a coat. It definitely turned out to be more of an outerwear style jacket than a cardigan. I’d love to remake the pattern in a worsted weight to see what it would look like. I do also wish there was one more button up top to close the neckline a little more. This just means another Pender Cardigan is in my future for 2018!

Ceramic buttons by One Bear Ceramics.

Get the pattern for yourself on Ravelry and check out Lindsay’s Instagram page for other amazing knits.

SO GREEN Tree Mittens

Early last year whilst perusing knitting stitch patterns and designs, I found a chart for a fairly simple tree design. I had wanted to incorporate it into a pair of socks for myself but chart work always left me confused and frustrated. I saved the link in hopes that one day I would find the determination to figure it out.

During this time, I discovered a knitting friend, Kate. Kate dyes yarn in her home and has, on occasion, asked for my suggestions for new colour ideas. She has since learned that my suggestion is almost always GREEN. We would have discussions about colour combinations and I would leave expecting to return to a beautiful new green skein with flashes of black and gold. Yet somehow, I was always met with a gorgeous but disappointingly not-green skein, with maybe a speckle or two of something kind of resembling green. For Christmas, I was surprised with a skein of single ply SW Merino, entirely covered in the most rich, semi-solid green you could imagine. It’s SO GREEN, every time I look at it I can just imagine Kate saying, “Are you happy now?!?” She even let me name it for her shop (Austen–a somewhat roundabout tribute to my “ah mah” (grandma). We have distance, language, and cultural barriers preventing us from interacting, however I feel connected to her through our mutual love of crafting. She doesn’t have an English name, but Austen is the name of a song that makes me think of her).

The gloriousness of this skein brought all the tree-inspiration back to me. I had since completed a pattern requiring chart work, so I felt much more prepared to tackle it again. Turns out this chart is not as daunting as it seemed a year ago. I instantly decided on mittens, because you can’t let such beautiful yarn hide inside your boots!

I decided to make them top-down, which is a first for me. I like this method way better as it allows me to try them on as I go, so they fit much more snugly on my hands than most mittens. I drafted up my own pattern for future reference because I have learned to write EVERYTHING down when making new projects.

The final product is so smooshy and so green, and the tree design suits the yarn perfectly. As an added bonus, I made little button holes over the index finger and thumb so they can peek through to use on my phone while I’m out in the cold! So typical of my generation, eh? I definitely would have reconsidered making/wearing mittens if this wasn’t an option.

You can find Kate and her yarns over at www.fidleydyeworks.com. Austen should be up there soon, and you can check out the now-sold-out colourway named after me!

Kate, if you’re reading this, I appreciate you so much! Thanks for thinking of me and finally getting over your green-shyness. (:

Hello? Everyone Still Here?

Happy New Year!

I’m back! Website-ing is hard, and it took me longer than I anticipated to get everything set up. I like to think I’m pretty good at technology but this is a whole new level of skill. So many times I just wished I could go back to simply knitting.

BUT, all the hard work has paid off! I’m ready to start 2018 off with a shop launch and new crafting goals. This website is full of new features beyond the blog now. I encourage you to click around on all the new tabs and links. The WWK shop is officially open with a few cozy knitted items available for purchase. 3 styles, 3 colours, only one of each! Treat yourself to something nice to start off the year, why don’cha?

I’ve also converted what was formerly known as The Sidewalk Sock Project into Winter’s Weather Knits Gives Back, in order to encompass more knitted gifts and incorporate my charity work into my sales. You can read about that on the WWKGB tab.

Other fun plans for the year include:

  • Tons of new pattern ideas waiting to be shared.
  • Fun new fibres to play with.
  • Collaborations with new maker friends.
  • More blog posts, including what you’ve missed over the last few months of 2017!

Social media links are at the bottom of all the pages so you can keep up with everything that’s in store for this year!

2018. Let’s go.

We’re Moving!

We’re Moving!

Sneaking in an extra post this week to share some exciting news…we’re moving!–to a new domain that is. Winter’s Weather Knits is taking the plunge to become a self-hosted official website. While wordpress has been a wonderful platform for weekly blogging, it’s time to pursue some greater things. Keep reading to the bottom to make sure you’re in the loop about what’s going to happen because we want you to come along!

For years I have considered making a business out of my craft but never seriously committed to it. Just the sound of calling it a business makes me uncomfortable because that’s not what I want it to be. I just want to share my craft with the world, and make things that people will love. Part of being able to do that is putting more time and effort into my craft, and updating my website so it’s easily accessible by everyone who wants to join the family. I want to sell my handmade items so people can have WWK in their homes to keep them warm, while providing me with the funds to make this possible.

IMG_20171108_123829_093

This is the farthest I have ever gotten in my attempt to branch out. I have invested a fair sum of my own income into materials to produce items to sell, including custom made fabric labels to attach onto my final products. This doesn’t even take into account the amount of my personal time I have spent trying to get this project up and running. The next step for me is to set up shop online, which means converting my little weekly blog into a full-fledged website.

That being said, the main reason for this post is to let my small but loyal following know I will be converting my wordpress blog into a self-hosted website in the upcoming weeks! I want to send a special bit of love out to everyone who has been reading, whether you’ve made it known to me or not. I am not particularly tech-savvy, and I’m finding this process incredibly overwhelming, but I’m optimistic that we’ll all come out on the other side of this bigger, better, and ready to handle the treacherous winter we’re supposed to have this year. Here’s what you need to know:

  • This site will be moving to a new domain name and getting a few new features including an online shop link
  • We may be offline for a little while, but rest assured we will be back and hopefully on a regular weekly posting schedule again soon
  • I’m going to try to bring those of you who are following my blog over with me, but we may get lost along the way. I would suggest you keep an eye on my Instagram page (@wintersweatherknits) for updates so we can stay connected (also for quality content haha)

See you on the flip side!

Buying a Baby Alpaca

Buying a Baby Alpaca

Oh how I wish I was actually buying a live alpaca…unfortunately not…yet.

When I first started knitting, my first focus was different garment types. I learned basic concepts of socks, sweaters, mittens, scarves…and so on…

Then, I transitioned over to learning new stitch patterns. Among my favorites are diagonal basketweave, linen stitch, herringbone stitch, and broken seed stitch.

I also dabbled in a bit of colorwork–changing colors, carrying up yarn, intarsia…

My newest path of exploration is fibres! For a long time I only ever worked with acrylic. It was cheap and accessible, and simply, good enough for me. I didn’t see the need to spend tons of money, and acrylic was always easily accessible in a large variety. Until recently, I was always satisfied with what I was working with.

Screen Shot 2017-11-05 at 7.43.44 PM

I started investigating natural fibres when I established a place in the instagram knitting community. Among the huge selection of natural fibre vendors, We Are Knitters jumped out at me as a well-known, fairly commercial supplier of adorable and squishy yarn balls. WAK had very simple, pure fibres in beautiful contemporary colors, thus I was inclined to place an order with them. Even though their mainstay is sheep’s wool, it was their baby alpaca that really drew my attention. I did some online research about types of wool and from what I pulled apart from the scientific jargon, baby alpaca seems to have one of the lowest micron values, and that makes it softer and less likely to make you itch (hopefully…).

IMG_20170910_094003

Before committing to a purchase, I stopped by a LYS called 88 Stitches to see if they had any baby alpaca. They didn’t have anything specifically labelled, but the lady there did point me in the direction of some 100% superfine alpaca (which, if I remember correctly is just a slightly higher micron range). I fell in love with it almost instantly and since I’ve brought it home I haven’t been able to stop touching it. With that, I was ready to take the plunge with the WAK online store. I ordered a set of 10 skeins in 5 different colors.

IMG_20171103_095802

They are all so wonderfully squishy and cute! These are all going to be made into hats to sell (though I may snag one for myself), but now that I’ve had a feel of the good stuff, I’ll definitely be saving up to get a large quantity of the same color to make something for myself…a sweater perhaps?

My sister and I have definitely had a few semi-serious conversations about buying a herd of alpacas to raise in the countryside. We both have this desire to get away from the stress of the city and live a simpler life doing what we love. What a dream it would be to raise alpacas, shear them, make my own yarn, and knit with it.

In the mean time I’ll just be here fondling yarn balls…